Latest news from ReprapWorld
Check out our cool new board! Finally an easy integration of mechanical endstops onto a small pcb. Check it out here
Having your printer run autonomously can have some advantages. For one, you don't need to have your PC running the whole time. Or you can use your PC without worrying to accidently cancel your print. Finally running of SD may run smoother than transferring many lines of gcode quickly over USB. In any case, there are some solutions to get your printer to run autonomously or stand-alone.
This is our new pre-crimped thermistor wire. Still using ptfe insulated copper wire, but the leads of the thermistor are covered with fiberglass sleeves. This improvement reduces the change of failure while printing because of melting wiring. You can use kapton tape to fix the thermistor to your hotend.http://reprapworld.com/?products_details&products_id=393&cPath=1616_1652
Stefan Oosterwold is building a very neat and very large delta printer. It is based on
Megatronics V3.0 and has a build volume of 300mm diameter by 600mm height. It will have
three extruders cooled with water cooling. By using larger stepper motors with direct drive
Stefan expects to be able to reach very high speeds
- Orders dispatched same business day
- 3.000+ products in our assortment
- More than 45.000 satisfied customers in over 40 countries
- Secure payment for all payment options
- Professional tech support (over 10 years 3D experience)
